ROBERT COFFEY'S RESEARCH
BACK TO BASICS
Research Article no. 1 / GPR (Great Pyramid Research) / Robert M. Coffey
There must be as many different fields of research and both proven and unproven theories on the pyramid, as there are words within this article. It is a true fact that the Great Pyramid itself has been studied and investigated more than any other built structure on the face of this earth. Over the years it has been microscopically examined by professionals from almost every country on the planet, and it is still holding secrets from the world.
Impressive as these facts are, still the closer someone is to an understanding part of its puzzle, they only find a new hidden door to open. Case in point, as technology advanced, so has findings of hidden voids, possibly built rooms, all from sonar soundings, and small tracked robots. And as I write this, these areas are yet to be explored (As far as, we, the general public knows).
I studied the work of many authors who are also searching pyramid secrets. I became aware that a "thread" (the SETI Program calls this a "primer") was missing. What I’m taking about is not missing work or data from within the nearly perfect research being done, by so many, but a system, or form of communication that can read like a map. Most believe this "map" must and will turn out to be based on math, and the related physical laws of the known universe.
In march of 1999, the result of a lot of experimenting with computer models in both scaled and full sized, pyramids, ended in a 45 page research paper. This document is based on a system of repeating patterns and angles, it is not a spin off any current compiled data. Instead I was trying to get back to a basic visual system that could work and repeat itself, referencing the previous, with new information. Thus confirming the previous information as factual, and would provide a type of visual map or chart based on math. But not being the result of current standards such as 360 Degrees., metric, or feet- inches etc.
(I hope, I didn’t lose you on that last statement), stay with me here, and let's pretend that it is two or three hundred years ago, and you’re a traveler in a foreign land, and not understanding the native language. So with hand and body movements you able to convey that you’re a friend not foe, and you would not like to be the dinner, for the tribe that night! Establishing that your life is not in danger, it’s time to get down to business and get a few directions. And without verbal words or hand movements both you and your new friends are bent over a patch of dirt with sticks in hand. Both of you are drawing mountains and rivers in the dirt. Lets visualize that you just scratched out an outline of a mountain. Then pointing to the one on the horizon your new friend knows that’s what you drew. He in turn draws two more mountains next to yours. Of different sizes. He reused your system of lines and angles, repeating the shape but not the size. He showed you that the next two mountains you’re going to pass, one is larger, and other is smaller, than the one currently in sight. This scratching contiues until there is a dirt map of mountains, lakes, and rivers, that all can read and understand. This successful communication transpired by a system of repeating patterns, lines, angles, and images, with math as the common denominator.
This "system", "primer", or "thread" of repeating patterns, is the area of research I chose to investigate. And with some success I’m happy to report.
As with any new findings, success can be measured if the results can be repeated over and over with the same conclusions. And if these results are new and not previously discovered, that will make it, even more conclusive. My research did in fact result in new pyramid data, and a new "system", I call " PRP" (Pyramid Repeating Patterns). They can be drawn by hand in the "2D"(2-Dimensional) form, with little effort, in any scale!!!
This PRP system can be easily confirmed with current data, anyone can find. And you’re not going to need a BS, MD, or PHD to work these repeating patterns. In fact my following article "PRP- Drawing Lines in the Dirt" is going to take anyone, step by step, though the actual freehand drawing of PRP’s.
This article is the first on my PRP research and the first mention of it to the general public. My plans are to proceed on, with more articles about PRP’s, starting and progressing from the "2D" hand Drawn types, you can do yourself, through to my current results of "3D" full-life size pyramid, planets and solar system computer models. All of my research is provided in the X, Y, and Z coordinates. Thus allowing anyone to use other types of math, to reconfirm the given data. In most cases the information is provided to within 0.00000001 tolerance.
I haven’t attempted to confirm a possible construction date of the pyramid, but I am working on it, taking in account for continental drift, locating it back at a more accurate 60 degrees from its present 59 or so degrees.
Some of the items resulting from my research have been the scaled orbit of the moon from the earth. Not being just an average circumference, but the perigree, semi-major axis, and the apogree of the moon’s elliptical orbit. For me, the most interesting PRP’s are the surface diameters of planets with the repeating pattern’s difference being only each planet’s inclination of orbit from the earth’s. I even found a PRP that provides the photosphere diameter of the sun. And to put a little more "icing on the cake" of previously mentioned findings, all groupings of related patterns reference one another in the same scale to each other …. Another repeating pattern.
Allow me to come back down to earth and make a few personal comments on my feelings about current pyramid research. Once I put my foot in the door and started looking into this subject, I realized that the number of persons seriously working in this field are few compared to the vast number that just hold a strong interest. On top of that all currently involved are but a dot of ink on this page. in relation to the world of research. Today there are so many areas of cutting edge technology and discoveries going on, that the Great pyramid, to many scientists has become a dust covered stack of engineered stone. And To this effect, I’m glad, in a way that it is. Because those of us who have limited time and no access to a million-dollar grant, have got the chance to work and research something that still is holding secrets. Thanks to the information access world of today, we are able to get involved in productive pyramid research, and don’t have to spend any valuable personal funds and personal time in traveling around the world, to do so.
One thing I am personally sure of, The Great Pyramid holds a mystery about it’s origins and the purpose for its existence, more so than any built structure in the world. Past or present.
I think that the results of my findings on PRP’s might become a "primer" that can be used by other researchers studying the pyramid, once the system is understood.
Robert M. Coffey
4070 Ridge Drive Apt #130
Memphis Tenn. USA 38115
RMCoffeyDesigner@aol.com
To attain a copy of my research results write or e-mail me and I will provide information on how to order it.
PRP Drawing Lines in the Dirt
Research Article no. 2 / GPR (Great Pyramid Research) / Robert M. Coffey
The SETI Program is, in part, searching for a "primer", to form a link, to possibly read patterned electronic signals. A possible Primer example would be the word "plus" or the "+" sign, in some form of a signal So in theory given that they had a sheet full of different beeps and clicks, all in uniform order. With such a primer these useless beeps become a form of math, maybe with clicks the sum of the beeps. But for me, a little closer to earth is the local library along with access at my home to tons of data on the Internet. And sitting right here on the face of this planet is a huge beacon of information, and you can walk up to it, and put your hands on it. The Great Pyramid.
My research on this pyramid has found a primer system of repeating patterns, not a set symbol or shape to be used as the fore mentioned Plus sign signal, but instead in a similar system of usage, being lines, angles, and circles, which I call PRP’s (Pyramid Repeating Patterns). This PRP system allows you to "read" the existing features of the Great Pyramid.
These patterns form a "Map" or "Chart" of symbols or lines that once their representation is understood, their repeated use in a larger or smaller sizes or different lengths can be read. Like a map reads distance between towns or like wise the size of the circle or square reads as a town on a map. Take all the words and descriptions off a map, and you still can read it once you able to understand the lines and what the symbols represented. Much the same as the traveler and his new friends read their map (in the previous article no.1), without written or spoken words to describe the drawn lines and symbols. Being that both parties did not speak or write the same language. They were successful in scratching in the dirt at their feet, a map, that all of them understood and read.
For me to continue on and write the volume of math and written examples needed to convey how PRP’s (Pyramid Repeating Patterns) work, will take a page or two, and that’s just for the first two or three PRP’s. I would also have to explain and provide references and justifications (two or three more pages). Instead I’m going to take this article in a different direction. Hopefully opening the door to involvement from anyone researching the pyramid.
To do this, a simple set of standards must be used to communicate between different researchers and in a way that is mathematically uniform.
So let us draw a few lines in the dirt and see if any of these possible "Pyramid Standards" take hold and become useful as a standard medium between pyramid researchers? While at the same time visually explaining the PRP system?
The first system of PRP’s we are going to look at is centered on what almost all pyramid researchers agree on, The pyramid being a scaled representation of the earth. But I’m going to put a twist on this line of thought and show this grouping of PRP’s as using the missing cap stone surface (on the existing pyramid) as referencing the Polar Axis Diameter and the Equator Axis Diameter of the earth scaled to within 99.66% accuracy! This example along with a few more using the missing cap stone, (in my following articles), may bring about some of you, to consider that a finished cap stone may have never existed!
So, I need to get, you, the reader, to try some freehand drawing of a few "2-D" (2-Dimenstional) PRP’s……Laugh now,…….. But by doing this, I can get those two pages of written math and three pages of justifications, into your head with just a line or two of simple drawing instructions. And if you’re successful the finished drawing is going to look like a type of star chart out of a space movie! A "stand-alone" chart that reads with it’s own symbols and reference points. Without any of the pyramid’s features having to be shown!
If actual drawing is not your cup of tea, please do continue reading because I have sequenced the instructions in order as to provide examples proving the PRP system. As you proceed you will realize that each new step taken in a given set of patterns, references, uses and confirms the previous related pattern. But if you were to stumble onto any one of the parts of the PRP, that part will "stand-alone" and you can use it to "back-Engineer" and discover it’s previous steps. Or go both forward and back, as I did when I happened upon the surface diameter of Jupiter, then repeated the pattern and found Saturn’s diameter. And then ‘back-engineered" to find the earth’s diameter and the nesessary centering point of that PRP system.
There is only a few things that you must have to be able do this,
First is a drawing or picture of a cross section of the Great Pyramid. This needs to be the standard one that is most often printed, showing the Queens And Kings Chambers and the ascending and descending passages on the right-side of these chambers (PRP’s work at any scale, so any size picture or book page will do).
Second your going to need a compass, the dime-store type with a pencil attached to one side will do just fine.
Third: tracing paper or regular copier paper will work if it’s transparent enough to see most of your pyramid picture’s features though it. Along with a pencil and straight edge or ruler,…. lets start drawing.
X, Y PLANE (Two-dimensional coordinate system)
[Locate the sheet of drawing paper over the pyramid picture, and consider that the surface of the paper is the X, Y Plane]
X AXIS (Always horizontal on the surface of the X, Y plane)
[Draw a horizontal line from outside bottom right edge to outside bottom left edge, across the base of the pyramid] Label this line; X Axis
POINT 0,0 (The origin in a 2D coordinate system is the point where the values of X, and Y, is zero.)
[Locate and mark the center point of your X Axis line] Label this point; 0,0
Y AXIS (Always vertical on the surface of the X, Y plane)
[Draw a vertical line from Point 0,0 up the center, to the top of the pyramid] Label this line; Y Axis
EC1 (Earth Circumference No.1)
[Draw a complete circle centered on Point 0,0 / it’s radius being from point 0,0 to one end of the X axis horizontal line] Label this circle; EC1
MCSN (Missing Cap Stone North)
MCSS (Missing Cap Stone South)
[Now the fun begins; slide the drawing paper up the center of the pyramid picture so that the top of the EC1 (Earth Circumference no.1) circle is just above the missing cap stone surface, and the circle itself is touching each outside edge of the flat surface of the missing cap stone location. You will know if the paper is correctly located, if point 0,0 is within the Queens Chamber near the top] [mark the right and left ends of the missing cap stone surface where it intersects the EC1 circle] Label right side point; MCSN,
Label left side point; MCSS
Note; Tape down or keep the drawing sheet in this location from this point on.
QPSB (Queen’s Passage Step Base / bottom of the existing step along the passageway, near the Queens Chamber)
[Locate and mark this point on your drawing sheet] Label this point; QPSB
PRL1 (Pyramid Reference Line No.1 or Pattern Reference Line No. 1 / this line is reused in many different PRP’s. So calling it a reference line fits best. / Later, in my next article, we will use it to locate the Earth Orbital Plane around the sun. But for now we are going to use it to locate the pyramid on the face of the earth, the angle of the earth at the time of the solar equinox, and the centering line for the earth diameters)
[Using a straight edge or ruler draw a line from point 0,0 to point QPSB, extend this line in both directions to the outside of the EC1 circle] Label this Line; PRL1
PL
PYRAMID LOCATION PRP (this is the first example of a PRP, not as obvious to follow as others, but it is a repeating pattern)
[At the upper left side of your earth circle EC1 Draw a straight line from the intersection point of the PRL1 line up to the top of the EC1 circle, where the Y axis line crosses it] Label this Line; PL
NOTE; If you were able to extended the PL1 Line down into the earth from the actual pyramid in Egypt, it would exit back out of the earth within ¼ of a degree from the North Pole Axis! Consider that the EC1 circle on your drawing sheet is a scaled reference to the actual surface of the earth. And let’s pretend that you rotated and moved your picture of the pyramid (as if it was sitting on the earth) up to the PL1 / PL / EC1 intersection. Your going to find that the PL line you just drew REPEATED the PRL1 angle of your pyramid drawing and you just confirmed the location of the pyramid on your chart drawing, relative to the actual pyramid on the actual earth surface to within 99.94% accuracy. Given that the Y axis line represents the polar axis of the earth!
SE
SOLAR EQUANOX PRP (A Point in the rotation of the earth around the sun when the day and it’s following night are equal in time. This happens because of the earth’s tilt and rotation on it’s axis.) [Draw an arrow at the top left end of your PRL1 line, pointing away from your drawing and off the sheet] Label this arrow as; SE
EPD and EED
EARTH POLAR DIAMETER and EARTH EQUATOR DIAMETER PRP’s
(As the earth spins on it’s axis the equator has a wider diameter than the diameter between the north and south poles. The happens because the earth’s core is fluid not solid, and the spinning centrificial force, expands it’s fluid core along the equator.)
[Draw two complete circles, both centered at the QPSB / PRL1 intersection, the first one’s radius being the distance from this point to point MCSN.] Label this circle; EPD [Now this next circle you need to draw is so close to being the same size that it will be drawn almost on top of the first one, it’s radius is the distance from QPSB / PRL1 to MCSS] Label this circle; EED
NOTE; We have confirmed that the EC1 circle is scaling the earth surface per the previous Pyramid Location PRP. Taking that into consideration, and using that same scale, both the EPD and the EED circles you just drew are to scale with the actual polar and equator earth diameters to an accuracy of 99.72%
EOE
EARTH OBLIQUITY of the ECLIPTIC PRP (As the earth spins on it’s axis, it has a very small wobble, or oscillation. This is not the tilt of the axis that causes the seasons, but an actual oscillation of almost 2.4 degrees. This is a very slow and small circular movement of the axis that takes about 41,000 years to make one complete cycle.)
[Draw a straight line from point 0,0 up to the top of the EC1 circle / EPD circle / MCSN intersection.] Label this line; EOE
NOTE; I chose to go ahead and show you this PRP, even though it’s not an obvious repeating pattern. But it shows clearly that as the information being displayed becomes more complicated, the PRP itself becomes equally complicated, and how even it’s location within the chart is symbolic to the information it’s providing. We have confirmed that the EC1 and Y-axis line is the "baseline" to scale the earth diameter and the polar axis from. We have also confirmed that the EPD circle is accurately showing us the "true" polar diameter of the actual earth. Now I need you to notice that the EOE angle line that you just drew, is pointing to the symbolic "true" north polar axis at point MCSN. The EOE line angle is scaling the actual earth’s obliquity of its ecliptic from the "baseline" polar axis or Y axis, at 90% accuracy
Let’s take a break from this drawing exercerize and allow me to invite you to email or write any comments or suggestions about this system. I hope that you have felt a little of the excitement that I felt as each new line you drew was actually displaying factual information, and not an unproven theory. Pull your drawing sheet up from the pyramid picture, and if you did not sketch any of the existing pyramid features on it, the drawing should be starting to take on the look of a chart. Don’t throw it away because I ‘m working on the next article "PRP’s Related to the Planets and our Solar System" and if you follow through with my next set of drawing instructions, your drawing will start to take a more "star chart" appearance.
In this next article along with locating the planet PRP’s, I will be showing how if you were to divide the EC1 circle into divisions of 250 parts. (The same as you would divide a circle into 360 divisions or degrees). Many of the existing pyramid’s angular features will "fall into place" matching the 250 degree system, This happens to go along with the sacred cubic system of divisions of 25.
P.S. If you try the 250 divisions (before I post the next article), make the 0/ 250 degree starting point location, to be on the X Horizontal plane line with point 0,0 inside the Queens Chamber (as before), and notice that the degrees tag the existing pyramid’s surface!
Robert M. Coffey
4070 Ridge Drive Apt #130
Memphis Tenn. USA 38115
RMCoffeyDesigner@aol.com
To attain a copy of my research results write or e-mail me and I will provide information on how to order it.
PRP-Pyramid Repeating Patterns / Research Reports / No. 1
By Robert M. Coffey
Existing Structure’s Bedrock Footing Details
The bedrock footing surface of the Great Pyramid
The first discovery of some of the sockets was in 1801. Since then they have been referenced as the original extent of the Pyramid. Overall lengths have been measured from corner to corner of them, but the sockets are on different levels. It is assumed that the faces of the stones placed in them extended up vertically from the bottom of the bedrock socket opening until they reached the pavement level. From that point the sloping face of the pyramid started. Many researchers since consider, that the distances of the socket corners were equal to the overall lengths of the Pyramid sides at that given level, this level being the possible top of the pavement level. This is not the proven condition. These out of square cut bedrock surfaces do in fact provide a level, and almost square plane at the pavement level.
The Pavement level or Base line of the Great Pyramid
The socket locations are not at equal depth down from the pavement level, along the bedrock base of the Pyramid.
The socket outside corners varies from a true square in proportion to their depth below the pavement level. The socket levels that are deepest below the pavement level are further out from the pyramid center
This means that the sockets were cut into the bed rock base to receive the footing course of the mantle finished sloping face, this sloping angle surface was continued down to the bedrock socket base level, (beneath the pavement level), as needed to reach the bedrock.
For this reason the outside dimensions of the sockets only show the size of the Pyramid, where it is resting on bedrock. These starting points being from varying levels, which were all under the assumed pavement level. Therefore its true base line or pavement level plane is 20 or 30 inches inside of the outside corners of the socket corners and above the bedrock footing on a level plane.
PRP-Pyramid Repeating Patterns / Research Report / No. 2
By Robert M. Coffey
Existing Structure’s Location on the Earth
The location of the Great Pyramid
Currently all countries and nations in the world uses a
single standard of coordinates called Latitude and
Longitude. This system is used in designating the location of places on the
surface of the earth. Latitude provides the locations north or south of the
equator. The measurements range from 0° at the equator to 90° at the poles.
Longitude, provide locations east or west of a north-south line called the prime
meridian. These measurements range from 0° at the prime meridian to 180° at
the International Date Line.
Although the equator was an obvious choice
as the prime parallel, being the largest, no one meridian was uniquely qualified
as prime. Until a single prime meridian could be agreed upon, each nation was
free to choose its own, with the result that many 19th-century maps of the world
lacked a standardized grid. The problem was resolved in 1884, when an
international prime meridian, passing through London's Greenwich
Observatory, was officially designated. A metallic
marker there indicates its exact location.
Degrees of latitude are equally spaced, but the
slight flattening at the poles causes the length of a degree of latitude to vary
from 110.57 km (68.70 mi.) at the equator to 111.70 km (69.41 mi.) at the poles.
At the equator, a distance of 111.32-km (69.17-mi.) separate meridians of
longitude 1 degree apart; at the poles, meridians converge.
Each degree of latitude and longitude is
divided into 60 minutes, and each minute divided into 60 seconds, thereby
allowing the assignment of a precise numerical location to any place on earth.
The Great
Pyramid’s location is in the Northern Hemisphere of the planet, at;
Latitude of; 29d 58’ 51.06” N
Longitude of 31d 9’ 0”E of 0.0d Greenwich Meridian
Within the nation of Egypt
Near the city of Cairo
The
movements of the Great Pyramid relative to Continental Drift
As accurate as The Great Pyramid’s address may seem to be, on dry land within the top of the content of Africa, but The Great Pyramid is moving. It is moving as well as you are too. This is not the planet earth’s rotation I’m referring to, but the actual drifting of whole contents on the face of the earth. This very small movement is continuos and is able to be measured precisely. The speed of this motion is a few centimeters per year, about as fast as your fingernails grow. An actuate example is the fact that Measurements from satellites show North America and Europe to be drifting apart at the rate of about 4 centimeters a year.
This
Continental Drift is caused by the Earth's crust actually floating on the molten
mantle. The crust and continents are divided into Eight major separate solid
plates.
North
American Plate - North America, western North Atlantic and Greenland
South American Plate - South America and western South Atlantic
Antarctic Plate - Antarctica and the "Southern Ocean"
Eurasian Plate - eastern North Atlantic, Europe and Asia except for India
African Plate - Africa, eastern South Atlantic and western Indian Ocean
Indian-Australian Plate - India, Australia, New Zealand and most of Indian Ocean
Nazca Plate - eastern Pacific Ocean adjacent to South America
Pacific Plate - most of the Pacific Ocean (and the southern coast of California!)
Because of the African plate being in motion, taking the Pyramid for a ride along with it. It must be taken seriously, the probability of the Existing structure’s location having been much closer to;
Latitude of; 30d 0.00’ 0.00” N
Than it’s current location of;
Latitude of; 29d 58’ 51.06” N
One must also take into consideration the rotating motion of the African plate movement. This motion may be the reason for the pyramids approximate 1.18d from true 0.00d North.
For these reasons this research is based on two pyramid models. One being the Existing Structure at it’s actual current location. And another matching pyramid, at a design location of 30d latitude, aligned at 0.00d True North.
